2.2 តុបិទបើកមិនធ្វើអាជីវកម្មសម្រាប់ស៊ីម៉ងត៍។

ផ្ទះ។ / ឯកសារភ្ជាប់ទាំងអស់។ / 2.2 តុបិទបើកមិនធ្វើអាជីវកម្មសម្រាប់ស៊ីម៉ងត៍។
Forklift fork clamps
Forklift fork clamps

ការ​ពិពណ៌នា​ពី​ផលិតផល


2.2ton Non-sideshifting Fork Clamps for forklift

ការដាក់ពាក្យ:

សាកសមសម្រាប់ការតោងទំនិញនិងក៏សម្រាប់ការគ្រប់គ្រងធ្នឹមផងដែរ។

លក្ខណៈពិសេស:

សំណង់ដែកថែបទាំងអស់រឹងមាំបំពេញតាមតម្រូវការសម្រាប់ប្រតិបត្តិការជាបន្តបន្ទាប់ដោយប្រសិទ្ធភាពខ្ពស់។
ស៊ុមអេឡិចត្រូនិក - រន្ធដោតផ្តល់នូវស្ថេរភាពល្អឥតខ្ចោះនិងអាយុកាលប្រតិបត្តិការបានយូរ។
ការរចនាសមហេតុផលជាមួយសមាសធាតុធារាសាស្ត្រដែលមានគុណភាពកំពូលរបស់ពិភពលោកដែលអាចទុកចិត្តបាន។

ស៊េរីផលិតផល៖
ការមិនជិះជាន់។
ស៊ីម៉ងត៍។
ការបង្វិល។

សម្គាល់ៈ
សៀគ្វីធារាសាស្ត្រពីរបន្ថែមទៀតត្រូវបានទាមទារលើឡានដឹកទំនិញសម្រាប់មុខងារតោងនិងបង្វិល។
បន្ទះទំនាក់ទំនងពិសេសអាចរកបានតាមការស្នើសុំ។
ផលិតផលទាំងអស់ដែលបានចុះបញ្ជីខាងលើគឺជាម៉ូដែលស្តង់ដារផលិតផលផ្ទាល់ខ្លួនអាចត្រូវបានផ្តល់ជូនស្របតាមតម្រូវការលម្អិត។

សម្រាប់ការគៀបសម - ចំណុះ ២.៥-៣T ផ្លេផ្លិចវិលត្រលប់ទៅទំព័រ“ ឯកសារភ្ជាប់សម្រាប់លើក” ចុច“ ការតោងដោយគ្មានការផ្លាស់ប្តូរចំហៀង (២-៣-៣T)” ដើម្បីរកគំរូត្រឹមត្រូវដែលអ្នកត្រូវការ។

ឬអ្នកគ្រាន់តែអាចទាក់ទងមកយើងជាមួយនឹងតំរូវការផលិតផលរបស់អ្នកយើងនឹងបង្ហាញគំរូដើម្បីបំពេញតាមតំរូវការរបស់អ្នក។ សូមអរគុណសម្រាប់ទស្សនៈរបស់អ្នក។

Fork Clamps Drawing
Fork Clamps Drawing

ការបញ្ជាក់។

មជ្ឈមណ្ឌលផ្ទុកសមត្ថភាព។

(kg @ mm)

Modesថ្នាក់ម៉ោន។ជួរបើក។

(ម។ ម។ )

ប្រវែងដៃ។

(ម។ ម។ )

ទទឹងស៊ុម។

(ម។ ម។ )

កម្ពស់។

(ម។ ម។ )

ទំងន់។

(គក)

កម្រាស់មានប្រសិទ្ធិភាព។

(ម។ ម។ )

មជ្ឈមណ្ឌលផ្ដេកនៃទំនាញផែនដី។

(ម។ ម។ )

1100@600CFS15D-001A ។II435-1555915865620250175163
1100@600CFS15D-002A ។II435-15551065865620259175191
1100@600CFS15D-003A ។II435-15551220865620268175226
1600@600CFS20D-004A ។II410-1660915940620295180168
1600@600CFS20D-005A ។11410-16601065940620306180198
1600@600CFS20D-006A ។II410-16601220940620328180231
2300@600CFS30D-001AII465-18109151015915401208173
2300@600CFS30D-001BIII465-18109151015915422216168
2300@600CFS30D-002AII465-181010651015915420208203
2300@600CFS30D-002BIII465-181010651015915438216201
2300@600CFS30D-003AII465-181012201015915435208226
2300@600CFS30D-003BIII465-1810122010159154216201

 

សម្គាល់ៈ

  • ទទួលបាននូវសមត្ថភាពជាក់ស្តែងនៃឡានដឹកទំនិញនិងឯកសារភ្ជាប់ពីក្រុមហ៊ុនផលិតឡានដឹកទំនិញ។
  • ពីរសៀគ្វីបន្ថែមប្រេងដែលត្រូវការនៅលើឡានដឹកទំនិញ។
  • Opening arm can be added on the fork clamps as requires
  • Provide the different fork demand as requires
  • Please contact the sales from huamai.

 

លំហូរនិងសម្ពាធធារាសាស្ត្រ។

 

គំរូ។លំហូរ Min.Hydraulic (L / នាទី)រេស។ លំហូរធារាសាស្ត្រ (L / នាទី)លំហូរអតិបរិមាភី។ អេ។ ហ៊ី។ អេស។ (អិល / នាទី)នាទី សម្ពាធធារាសាស្ត្រ (បារ)អតិបរមា។ សម្ពាធធារាសាស្ត្រ (បារ)
CFS15D15252535160
CFS20D15252535160
CFS30D15404035160

 

Options

Fork Sizes

មានថ្នាក់ម៉ោនផ្សេងៗគ្នា។

ជួរបើកផ្ទាល់ខ្លួន។

MEDIA GALLERY

ក្ដាប់សម។
ក្ដាប់សម។

Package 

Forklift Fork Clamps Package
Forklift Fork Clamps Package

Reading Instruction

  1. Product Model

Huamai model no. Consists of letters and numbers connected by “-”, the details as below:

RCF20F-002B ។

Name: Based on the product's functional and structural classification, an abbreviated product code is given

Example: RCF - Fixed short arm paper roll clamp

Capacity: Capacity= Code+00 (KGS)

Example: 20-2000 KGS

Series: The generations of the products

Example: D - The fourth generation

Clamp arm size: It is used to distinguish the same capacity, series and types of products with different structure sizes.

Example: 002 - The maximum diameter of paper roll is 1300mm

Mounting Class: The mounting class of the product

Example: B - III

  1. Matching with Forklift

Please pay attention to the flow and pressure volume requirements for the attachments. Don’t exceed its maximum. Any special requirements such as pressure setting etc, other auxiliary devices may need to be added. Please contact our representatives for details.

  1. Fitting Version

Fitting size is as per GB standard, with face seal type (M18 x 1.5). For special type please contact Huamai sales.

  1. សមត្ថភាព។

The load capacity is only a parameter to measure the performance of structure, and the actual comprehensive carrying capacity also depends on the carrying cargo, working conditions and the capacity of forklift. Accurate forklift truck with comprehensive load capacity, please get it from the forklift factory.

  1. ថ្នាក់ម៉ោន។

The attachment is the mounting bracket of the product on the back of the product. Standard products carry these hooks and require forklift forks to meet international standards to properly mount the connection.

The meaning of installation is as follows:

Forks Carriage

IIIIIIVV
Rated capacity of forklift (kg)1000-25002501-49995000-80008001-10999
ឯកតា។ម។ម។ម។ម។ម។ម។ម។ម។
b407.0016.02508.0020.00635.0025.00728.0028.66
h (maximum)381.0015.00476.0018.74597.5023.50681.0026.80
h (minimum)380.0014.96474.5019.68595.0023.50678.0026.70

 

  1. Clamp arm& Forks Length

The clamp arm & fork length listed in this product manual is the effective length for the actual operation of clamp arm & fork.

  1. Warranty

Huamai  gives the warranty of new attachments 24 months from the date of delivery to first receiver or 4000 work hours according to the warranty policy listed in the products manuals.

Calculation of Comprehensive Net Capacity

The capacity is an important factor in the model selection for the forklift trucks and the attachments, the overall comprehensive capacity of the forklift truck and the attachment will decline when the forklift install with the attachments because of the below two factors:

  • Part of the capacity moment may be offset by the moment of its self-weight.
  • The load countermove forward because of effective thickness during the actual operation.

The formula below helps to calculate the net capacity. The ultimate value of capacity for reference only.

The counting parameters of forklift

Q: Rated capacity of forklift (kg) (Note: The rated capacity is relevant to the maximum height of lift)

X: The horizontal distance from the center of front wheel to the fork from face (mm)

C: The horizontal distance from the fork shank front face to the load center (mm)

S: The thickness of fork (mm)

The counting parameters of attachments

M: Attachment self-weight (kg)

A(A-X): The horizontal distance from center of front wheel to carriage front face (mm)

HGG: The horizontal distance from front face of carriage to horizontal center of gravity (mm)

ET: The horizontal distance from the carriage front face to the loaded back face (mm)

L: The horizontal distance from the loaded back face to the load center (mm)

Example:

Q= 2500kg   X= 450mm   C=500mm   S= 50mm

M=600kg   A= 400mm    HCG=300mm    ET=200mm

L=500mm

Comprehensive Net capacity (Residual capacity)

The minimum value got from the rated forklift truck load capacity, the attachment load capacity and the comprehensive net capacity as the actual capacity of the forklift trucks and the attachments as one, the weight of the carrying goods shall not exceed this allowable value.

* The accurate comprehensive load capacity value of the forklift truck and the attachments is getting from the forklift factory.

Warranty

Thank you very much for purchasing Huamai attachments. In order to fully understand your rights as our customer, we recommend that you read the content of this warranty carefully.

The following: HM refers to Fujian Huamai Machinery Co., Ltd.; “Buyer” means a direct product purchaser and user.

Huamai Products

Huamai guarantee the products comply with contracts, quotations, relevant performance parameters of the requirements listed in the manual.

Warranty: Huamai new products.

New Products: Warranted for a period of 24 months following date of buyer receiving products, or 4000 working hours since date of installation whichever reaches the first.

Our promise to you

Huamai will repair or replace, at our option, any parts we deem to be defective in materials or workmanship, subject either to our own or Huamai authorized inspection.

Comprehensive net capacity

The calculation of the attachments comprehensive net capacity only for reference. The comprehensive net capacity of the forklift/attachment combination will be submitted by the original forklift manufacturer.

Buyer and User Attention

To preserve Huamai’s Warranty, Buyers and End Users must carefully follow the applicable User Manual when installing, adjusting, maintaining and operating Huamai equipment.

The buyer/end user must the obtain written authorization from Huamai for repairs, other than removal/replacement of defective parts.

Any unauthorized repairs or alterations, use of parts not provided by Huamai, or failure to following Huamai User Manual will result in loss of warranty.

Notice

Huamai does not warrant that its products will perform any particular task where conditions are not suitable for the product.

Huamai assumes no responsibility for loss, damage or injury to persons or property or for consequential damages, resulting from the possession or use of its products.

Huamai Warranty done not cover for general wear and tear, abnormal applications, normal or scheduled maintenance.

There are no warranties either expressed or implied including any warranty of fitness for a particular purpose which extend beyond those stated in this warranty and the product description on the face of Huami order acknowledgement.

Return/Rejection Policy

Please keep the attachments in unused condition. Please note that any actions must firstly adhere to the valid contract or additional agreement issued by Huamai.

Please submit the return permission. All costs and expenses caused are the sole responsibility of the buyer.

Where the following conditions apply, we will refuse returns.

  • Be in used condition.
  • Be not returned in original design.
  • Special designed for customer.
  • Special items mentioned in sales contract or additional agreement.

Thank you for choosing Huamai. If you have any requirements, please feel free to contact us.

សំណួរគេសួរញឹកញាប់

1: What kind terms of payment can be accepted?
A: For terms of payment, normally L/C, T/T.

2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, etc.

3: What about the delivery time?
A: 1-15 days after receiving the deposit.

4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.

6. Can I have a sample order?

ចម្លើយៈបាទ / ចាស order យើងស្វាគមន៍ការបញ្ជាទិញគំរូដើម្បីសាកល្បងនិងពិនិត្យមើលគុណភាព។ សំណាកគំរូអាចទទួលយកបាន។

7. Can you accept mixed batch of different products?

ចម្លើយ៖ បាទ / ចាសយើងគាំទ្រផលិតផលលក់ដុំលាយផលិតផលផ្សេងៗគ្នា។

8. Can you provide container packed in wooden cases if I order more products?

A : Yes,we are can provide a set of wooden packaging products.

9. We want to visit your company?

ចៈគ្មានបញ្ហាទេយើងគឺជាសហគ្រាសផលិតកម្មនិងកែច្នៃរង់ចាំការមកដល់របស់អ្នកហើយយើងនឹងនាំអ្នកទៅទស្សនារោងចក្រនិងរោងចក្រកែច្នៃរបស់យើង។